All bushings wear over time, it's
a fact of life. Every time your arm pivots up and down
there is the smallest amount of wear. JD Performance
suggests that you replace your bushings every other
year, unless you use your quad for racing, then every
year is suggested.
The best way to increase the
life of your bushings is to add a bearing kit to your
front end!
Adding a bearing to the front pivot points of your quad
is a very subtle yet affective upgrade. The bearing will
eliminate the wear around the barrel of the bushing,
while providing a smooth, fluid like pivot from the
arm. A complete Bushing
and Bearing kit includes
bushings, inner sleeves and bearings for each pivot
point of A-arms. Upgrade kit and bushings that this set
is complete for all four arms uppers and lowers left
and right side complete set.
Replacement bushing/sleeve kit= $85
Replacement bearing/bushing/sleeve kit=$150
Needle bearing upgrade = $70 (when ordering new arms)
If you have currently
have JD A-arms, you can upgrade to the
bushing/sleeve/bearing kit
for
only
$150
*includes new inner sleeve, bushings and bearings for
upper and lower arms
